How to apply
Magnetic Lashes
Curious about magnetic lashes? It's a breeze!
With a little practice, you'll be a pro in no time. It's so effortless, some can apply them in just a minute!
Apply
Attach
Step 1 - Apply
( Shake up that eyeliner before slaying 🔥)
- Starting with one eye, apply Starry Magliner from the inner to outer corner of lash line. It should be as thick as the size of the magnets on the lashes. If you prefer, you can add a wing.
- Wait for 20 to 60 seconds, depending on the amount of liner you used. The liner should be approximately 80% dry before attaching the lashes with magnets.
ps- Make sure to tightly seal the bottle after use to prevent the liquid from drying out.
Step 2 - Attach
( Attach lashes with tweezers/fingers. Your choice! ✨)
- Gently remove the lashes from the box and hold a mirror at chin level and look down as you slowly make contact between eyeliner and magnetic lash, making sure to align the middle of the band with the middle of your eye. Adhere the lash and secure the inner and outer edges. They should be attached to base of your eyelid, not to your eyelashes.
- Once lashes make contact with liner, grab lashes near the root and press into place to make sure it “sets”.
- Using an applicator or your fingers, pinch your natural lashes and false lashes together at the roots to seamlessly blend the two.
ps- Position the lashes approx 1 cm away from the inner corner to ensure they don't irritate or cause discomfort.
Done
Repeat same steps on another eye & your Evor Ready ! 😉💜
Important Steps before 1st use
Before you dive in, remember to do the swatch test and trim those lashes to fit your eyes perfectly. Safety first, beauty second!
Swatch test
Just like with any makeup product, it's important to swatch a small amount on your hand to make sure you're not allergic to any of the ingredients. If you don't experience any adverse reactions, then you can go ahead and apply it.
Trim
( The first time you wear a new set of false lashes, you may need to trim the length of the band so that it doesn’t poke in at one or both corners. )
- Place the false lash on top of your lashes to measure the strip against your lash line. Trim off any excess length from the outer edge for a perfect fit.
- If you need to trim the lashes, make sure to cut the band so that the end is a magnet. Always trim from the outer end and not the inner one, to maintain the lashes intended shape.
- We recommend using eyebrow scissors so you can be precise about where you’re cutting.
ps- Go easy on the trimming to ensure that you don’t cut off too much.
Read more:
Lash Care guide - click here
FAQs - click here
Try Now!
